Uncategorized

5MT. Same as Q64-13 but smaller battery post. Interchanges as a unit, but some internal parts differ. M8 x 1.25 copper battery post $48.00                         $40.00 c0re

Basically the same starter as Q63-12. Solenoid has small Bat. post. 66-143. Most units have a “no thick shim” needed in the solenoid bell housing. $48.00                         $40.00 core

PG260M. ’95-’01 GM models 3.8L.  Short bolt on left, long bolt on right. Ignition wire on right. $79.00                         $45.00 core

PG 260M. Permanent magnet. Bendix opening on left for 8 cyl. GM. Solenoid held on with 3 torx bolts. Small post on right. $79.00                           $45.00 core

PG 260M Series. Solenoid bolts to starter with 3 torx bolts. Q64-84 will work in it’s place and vice-versa.   $79.00                       $45.00 core

SD 210 series. Fits many 4cyl GM.                                                    Many have casting mark on solenoid bell housing. ” Thick shim not req’d” for proper installation O shape clamp holds solenoid onto starter.

5MT for quad 4 & 2.4L engine. Top ear threaded.  Reduced opening for bendix. Note: Installers need to use caution that the back end of the starter does not damage the crank position sensor during removal and installation. Typical GM solenoid $48.00                       $30.00 core

Most common starter for 3.8L FWD GM’s.  Notice casting lobe on left solenoid mounting bolt. Also reduced bendix opening. Typical GM solenoid. Note marking on solenoid bell housing which means ” A thick shim is not necessary” $48.00                        $30.00 core

Most common 5 mt for 4 cyl. engines. Solenoid post M10 x 1.5.                                                                      No reduced sized bendix opening. $48.00    

Choose between 2 applications. Click the pic for more info. F 150 standard application $105.00 _____________________________________________________ F 250-350 and super duty. $99.00